Flex System Input and Output Modules

 

Flex System modules connect directly to the Flex System Hub.

Input modules control both Flex System output devices and specific

Wiegand compatible output devices. Flex System outputs can be

controlled by either Flex System inputs or 3rd party Wiegand

compatible inputs.

 

Facts

    •  Weatherized

    •  Compact

    •  Bright screen

    •  Ideal for harsh environments

    •  Designed for storing and accessing CyberKeys in remote locations

    •  Can integrate with Wiegand compatible input and output devices

 

FAQs

Where do I install the Flex System modules? Flex System modules can be installed in off-the-shelf weatherized enclosures. Additionally, they can be mounted directly in a wall near the security element

they control (such as a door or gate).

 

What RFID cards are compatible with the Flex System RFID Reader module? The RFID Reader module

is compatible with 13.56 MHz RFID cards.

 

Can 3rd party input devices be used to open a CyberKey Vault WR? Yes, Wiegand compatible 3rd party input devices can open a Vault WR using a Flex System Door & I/O module.

 

Can Flex System input devices trigger 3rd party outputs? Yes, they can trigger Wiegand compatible and other 3rd party relay devices such as electric strikes, cameras, alarms, and more using the Flex System Door & I/O module.

Photo of a Flex System RFID module and a CyberKey Single Vault WR installed in an electical box.

RFID Reader Module (FS-RH01)

The RFID Reader module is an input device that can be used to control

a variety of outputs (e.g. unlock doors and gates, toggle security cameras, access a CyberKey Vault WR). The RFID Reader communicates ‘access’ and ‘event’ details back to the management software via the Flex System Hub. When integrating with a 3rd party output device, the Flex System Door & I/O module is required. RFID cards can be programmed with specific access permissions for increased security.

 

Display & Data Knob Modules (FS-DS01 & FS-KB01)

The Display & Data Knob modules are input devices that require an authorized PIN to activate the desired output (e.g. unlock a door or gate, toggle a security camera, or access a CyberKey Vault WR). The Display and Data Knob communicate ‘access’ and ‘event’ details back to the software via the Flex System Hub. When integrating with a 3rd party output device, the Flex System Door & I/O module is required.

 

Keypad Display Module (FS-KD01)

The Keypad Display module is a weatherized input device that requires an authorized PIN to activate the desired output (e.g. unlock a door or gate, toggle a security camera, or access a CyberKey Vault WR). The Keypad Display module communicates ‘access’ and ‘event’ details back to the software via the Flex System Hub. When integrating with a 3rd party output device, the Flex System Door & I/O module is required.

 

CyberKey Vault WR (FS-CV01)

The CyberKey Vault WR is a weatherized key safe that holds a single, unprogrammed CyberKey securely. The key safe networks directly to the

Flex System Hub via Cat5 over an RS-485 connection and reports ‘access’

and ‘key activity’ back to the management software. The key safe also recharges the battery of rechargeable CyberKeys.

 

 

RFID Reader Module (FS-RH01)
Data Knob Module (FS-KB01)
Display Module (FS-KB01)
Keypad Display Module (FS-KD01)
CyberKey Vault WR with cover on.
CyberKey Vault WR with cover off.